This "High Sound" automatic door bottom is designed and built to provide the ultimate in sound reduction. It features a double neoprene seal (See images above) that provide maximum sound reduction especially when used together with our. This product is available as a surface mounted or semi-mortised application, as shown in the illustrations. It is non-handed and can be applied directly over the floor surface or above a.Though a saddle is recommended for higher sound control (a saddle is also highly recommended when applied over a carpeted area). Available in three anodized finishes and length is custom cut to size, up to 60. Installation screws and instructions provided. This product utilizes a concealed flat spring mechanism which is activated by the pressure of closing the door (The brass nut at the head gets pushed in by the doors jamb, which lowers the seal). The high quality neoprene rubber seal drops, filling gaps up to 1, upon the closing of door to create a tight seal and raises up automatically when the door is opened to ensure smooth door operation. Our door bottoms have been tested through 5 million cycles and provide the same excellent quality as our mortised automatic door bottom. Automatic Door Bottom can be trimmed on the field up to 3-6, depending on the size ordered. Note, for maximum sound control, we recommend keeping the gap between the door and floor at no more than 3/8. Larger gapscan be treated with a doorway saddle or an added wooden strip to the underside of the door.
For a complete soundproof seal, make sure you completely seal your door with our high quality soundproof. Please note, images are for illustrative purposes only. They are not actual photos. Therefore, actual colors may vary slightly and size may be enlarged to show detail.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware". The seller is "trademarksound" and is located in this country: US. This item can be shipped to United States.